info@woodideas.co.in
Menu
Menu
FEATURES
HDF laminate flooring by Wood-Ideas, one of the largest manufacturer of HDF laminate flooring in the world, brings along a spectrum of unparalleled features that guarantee the flooring’s durability, quality, and superiority. Above all, these characteristics empower flooring to bring elegance to your space, thereby perfectly matching your vision and requirement. Here are some of the unique characteristics of our products;
Fast & Easy
Fast and easy single action installation
Stable
Strong, resilient and dimensional stability
Lower risk of squeaking sound
No shifting of short or long sides
High Impact Resistance
High resistance to impact or abrasion from furniture legs, chair castors.
Heat & Flame Resistance
Resistance to heat and flame
Skid-free & Slip Resistant
Skid-free and slip resistant
STRUCTURE
RANGE
Texture - 7 Design of texture
Design – Full side plank
Thickness – 8 mm and 12 mm
Grade – AC3| AC4 | AC5
| General Requirements | |
|---|---|
| Thickness of the element | Average +/-0.5 mm relative to the nominal value Maximal, minimal >= 0.5 mm |
| Length of top layer | No measured value because following values exceed nominal value: Length < 1500 mm: >= ± 0.5 mm Length > 1500 mm: >= ± 0.3 mm/m |
| Width of top layer | Average >= 0.1 mm relative to the nominal value Maximal, minimal >= 0.2 mm |
| Length of side in case of square elements | Average >= 0.1 mm relative to the nominal value Maximal, minimal >= 0.2 mm |
| Right-angle gauge test | Maximal >= 0,2 mm |
| Straightness of edge (longitudinal distortion) | Maximal >= 0,3 mm/m |
| Flatness of the element | Maximal individual values: Width concave >= 0.15 %, convex >= 0.20% Length concave >= 0.50 %, convex >= 1.00 % |
| Joint openings between adjacent elements | Average >= 0.15 mm Maximal >= 0.20 mm |
| Difference in elevation between adjacent elements | Average >= 0.10 mm Maximal >= 0,15 mm |
| Dimensional distortion with climatic changes | Length and width >= 0.9 mm |
| Lifting resistance | > 1,00 N/mm² |
| Lightfastness, EN 20105 | Blue Wool Scale, Part B02, no worse than 6 Grey Scale, Part A02, no worse than 4 |
| Indentation after constant load, EN 433 | No visible change >= 0.01 mm in test with straight steel cylinder, diameter 11.30 mm |
| Surface appearance, EN 438 | Minor surface defects are permissible |
| Moisture content on leaving works, EN 322 | 4 to 10 % Deviations within any one delivery >= 1.5% |
COMPARISON OF EUROPEAN STANDARDS
VS
WOOD-IDEAS FLOORING
| European Standards of Wodden flooring | Test | ||||||
|---|---|---|---|---|---|---|---|
| Service Categorey | Domestic | Commercial | EN685 | ||||
| Heavy | Light | Normal | Heavy | ||||
| Resistance to abrasion | AC 3 IP > 2.000 | AC 4 IP > 4.000 | AC 5 IP > 6.000 | Appendix E | |||
| Impact Resistance Newton/mm drop height | IC 1 | IC 2 | IC 3 | Appendix F EN | |||
| 10N/800mm | 15N/1000mm | 20N/1200mm | 438 | ||||
| 8N/1000mm | 12N/1400mm | 15N/1600mm | 2.11/2.12 | ||||
| Resistance to Stains Groups 1, 2 & 3 | Grade 5 | EN 438 2.15 | |||||
| Grade 4 | |||||||
| Resistance to cigarette Burns | Grade 4 | EN 438 2.18 | |||||
| Effect of a furniture leg | No visible damage when tested with test object Type O | EN 424 | |||||
| Effect of a castor chair | No visible change or damage | EN 425 | |||||
| Thickness Swelling | <20% | <18% | Appendix G | ||||
| WOOD-IDEAS LAMINATE FLOORING | Test | ||||||
|---|---|---|---|---|---|---|---|
| Domestic | Commercial | EN685 | |||||
| Heavy | Light | Normal | Heavy | ||||
| AC 3 > 3800 | AC 4 > 5500 | AC 5 > 6500 | Appendix E | ||||
| IC 1 | IC 2 | IC 3 | Appendix F EN | ||||
| 8N/800mm | 18N/1000mm | 25N/1200mm | 438 | ||||
| 6N/1000mm | 10N/1400mm | 15N/1600mm | 16N/1600mm | 2.11/2.12 | |||
| Grade 5 | EN 438 2.15 | ||||||
| Grade 4 | |||||||
| Grade 4 | EN 438 2.18 | ||||||
| No visible damage when tested with test object Type O | EN 424 | ||||||
| No visible change or damage | EN 425 | ||||||
| Thickness Swelling | <20% | <18% | Appendix G | ||||
Know Your Flooring
PLANK SIZE
1200mm x 191mm
1200mm x 220mm
THICKNESS
8mm/12mm
GRADES
AC3/ AC4 / AC5
Variants
PRODUCT FEATURES
